Ricoh AFICIO MP01 - Manual (Page 53)

USING THE CONTROL PANEL
2-21
USING THE
CONTROL P
ANEL
❐ Legal
❐ ISO4
❐ ISO6
❐ ISO11
❐ ISO15
❐ ISO17
❐ ISO21
❐ ISO60
❐ ISO69
❐ Win3.0
The default value is Roman8.
Menu Reset
From the Job Control menu, press the [ ] key and press the [
5
] key or the
[
6
] key until “Menu Reset” displays on the Control Panel.
When you press the [ ] key while “Menu Reset” displays, all printer settings
that are controlled in the Job Control menu are reset to the original default values.
The printer returns to Ready mode after resetting.
USING THE HOST INTERFACE MENU
To access the Host Interface menu, press the [ ] key to enter Menu mode.
Press the [ 5 ] key or the [ 6 ] key until “Host Interface Menu” displays.
The Host Interface menu contains the following:
❐ Parallel Setup
❐ NIC Personality
❐ Menu Reset
Note: The NIC Personality menu displays only when the NIC Unit is installed.
Parallel Setup Submenu
From the Host Interface menu, press the [ ] key and press the [
5
] key or
the [
6
] key until “Parallel Setup” displays on the Control Panel.