Ricoh AFICIO MP01 - Manual (Page 134)

SPECIFICATIONS
6-2
PRINTER
This section contains the electrical and hardware specifications for your printer,
including information on the hardware and software options. It also provides
information on the output capabilities of the printer.
Electrical and Hardware Specifications
This section contains the electrical and hardware specifications for your printer,
including information on optional equipment. Table 6-1 lists the basic printer
information and specifications.
Note: All specifications are subject to change without notice.
Table 6-1. Basic printer information
Component Specification
Resolution 600 dots per inch (dpi) standard
400 dpi available when the Tiff or the PostScript ® option is installed
300 dpi simulated by doubling pixel size at 600 dpi resolution
200 dpi simulated by doubling pixel size at 400 dpi resolution
Gray scale Up to 256 levels
Paper weight Tray 1 and 2 - 60 to 90 g/m
2 (16 to 24 lb)
By-pass tray - 60 to 157 g/m 2 (16 to 42 lb)
Paper capacity Trays 1 and 2 - 250 sheets or less than 27 mm (1.04")
By-pass tray - 100 sheets or less than 10 mm (0.4")
Printing speed 25 pages per minute (ppm) (Letter or A4)
Toner replacement Cartridge exchange
Power source 120V, 60Hz, more than 9.0A (U.S. and Canada)
220V, 50Hz, more than 4.5A (Europe)
Power consumption Energy saver mode - less than 45 watts (W)
Maximum - 950 W
Noise emissions Printer: Stand-by, 40 dB(A); printing, 64 dB(A)
Printer with all accessories: Stand-by, 40 dB(A); printing - 68 dB(A)
The measurements are made according to ISO 9296 at the operator
position.