Ricoh AFICIO MP01 - Manual (Page 130)

TROUBLESHOOTING
5-28
Table 5-9. Operator attention messages (continued)
Message Description Action
Remove Env Feeder or
Power off/on The envelope feeder was removed
with the printer power on. Remove the Envelope Feeder,
or turn the printer power off and
back on.
Remove Misfeed
<area> There is a paper misfeed in the
specified area. Remove the misfeed paper from
the specified area.
Remove Paper Output
Tray <number> The specified output tray in the
Mailbox is full. Remove the output from the
Mailbox.
Remove Paper
Shift Tray The Shift Tray is full. Remove the output from the
Shift Tray.
Remove Paper
Standard Tray The Standard (output) Tray is full. Remove the output from the
Standard (output ) Tray.
Open
External Tray The External Tray is closed, and the
job requires the External Tray. Open the External Tray.
Paper Size Error
Tray <number> The paper size selection dial on the
specified tray is not in the correct
position.
If the paper size selection dial is set to
the “
*
” position, and this message
displays, the paper size you entered
using the Control Panel may be
different from the paper you placed in
the tray.
Replace the existing paper with
paper that matched the paper
size indicated on the dial or
entered using the Control Panel.
The correct size paper in the
wrong orientation will also
cause a paper size error. If the
desired paper is placed in the
tray, but the size is entered
incorrectly in the Control Panel,
you must cancel the print job,
enter the correct size in the
Control Panel and restart the
job.
Press the [
] key to
continue the print job.
Press Escape to cancel
this job You pressed the [ ] key while the
system was processing data. Press the [Esc.] key when you
want to terminate the current job.
The printer may print a few pages
after you press the [
] key..
Press the [ ] key again to
enter the Menu Mode.
Press the [ ] key again to
continue the current job.