Ricoh AFICIO MP01 - Manual (Page 58)

USING THE CONTROL PANEL
2-26
System Config
From the Host Interface menu, press the [ ] key and press the [
5
] key or
the [ 6 ] key until “System Config” displays on the Control Panel.
When you press the [ ] key while “System Config” displays on the Control
Panel, a page prints describing the current system configuration.
Error Log
From the Host Interface menu, press the [ ] key and press the [
5
] key or
the [
6
] key until “Error Log” displays on the Control Panel.
When you press the [ ] key while “Error Log” displays on the Control
Panel, a page prints listing the last 15 errors and 15 paper misfeeds locations.
☛ Refer to the “Troubleshooting” chapter in this manual for more information on
printer errors.
PS Font List
From the Host Interface menu, press the [ ] key and press the [
5
] key or
the [ 6 ] key until “PS Font List” displays on the Control Panel. This option displays
only when the PostScript

option is installed.
When you press the [ ] key while “PS Font List” displays on the Control
Panel, a page prints listing all resident PostScript  fonts, downloaded fonts in
RAM, and all PostScript  fonts loaded on the Hard Disk.