Ricoh 450e - Manual (Page 109)

Series/Booklet Copies—Making One-Sided Copies from Various Originals And making Various Copies from a
Bound Original
83
2
❒ If the calculated ratio is under the
minimum ratio, it is corrected
within the range of the ratio auto-
matically. However, with some ra-
tios, parts of the image might not
be copied or blank margins appear
on copies.
❒ Separation line between originals
can be printed with the user tools.
See “6. Combine Copy” in
⇒
P.151
“2. Adjust Image 2 /
2
” .
❒ Even if the direction of originals is
different from that of the copy pa-
per, the machine will automatical-
ly rotate the image by 90
°
to make
copies properly.
❒ You can make copies even if the
number of originals is less than the
number required in the selected
mode. You can also disable this
function with the user tools. See “2.
Comb. Auto Eject” in
⇒
P.154 “3.
Input/Output 1 /
2
” .
A
If Duplex mode is selected, press
the {
Duplex } key to cancel the
mode.
B
Press the { Menu } key.
Note
❒ If you have not changed the de-
fault setting, press the 1 { Series /
Booklet } key. Go to step E.
C
Press the [
↓
Next] key until the
[Series / Booklet] is displayed.
D
Select [Series / Booklet] with the
<> keys. Then, press the [Select]
key.
E
Select the [16 pg
→
Booklet] with
the <> keys. Then, press the
[OK] key.
F
Set your originals, then press the
{
Start } key.
ND2C0102
ND2C0109
ND2C0109