Copying from the bypass tray, P.51 “copying from the by, Pass tray – Ricoh 450e User Manual
Page 77: 2copying from the bypass tray
Copying from the Bypass Tray
51
2
Copying from the Bypass Tray
Use the bypass tray to copy onto OHP
transparencies, adhesive labels, trans-
lucent paper, post cards, and copy pa-
per that cannot be set in the paper
tray.
Limitation
❒ You cannot use the bypass tray for
the Duplex function.
Note
❒ The machine can automatically de-
tect the following sizes as standard
size copy paper:
❒ If you do not use the standard size
copy paper, you should input ver-
tical and horizontal dimensions.
The sizes that you can input are as
follows:
Reference
For details about paper capacity of
the bypass tray, see
⇒
P.23 “Copy
Paper”
.
A
If Duplex mode is selected, press
the {
Duplex
} key to cancel the
mode.
B
Open the bypass tray.
C
Adjust the guides to the copy pa-
per size.
Important
❒ If the guides are not flush with
the copy paper, a skew image or
paper misfeeds might occur.
D
Lightly insert the copy paper face
down until the beeper sounds.
The k indicator on the display is
automatically selected.
1: Horizontal size
2: Vertical size
3: Extender
4: Paper guide
Metric version A3L, A4L, A5L,
8
1
/
2
"
×
13"L
Inch version
A3L, 11"
×
17"L,
8
1
/
2
"
×
14"L, 8
1
/
2
"
×
11"L, 5
1
/
2
"
×
8
1
/
2
" L
Metric version • Vertical: 100 –
297mm
• Horizontal: 148 –
432mm
Inch version
• Vertical: 4.0" – 11.7"
• Horizontal: 6.0" –
17.0"
ND6H0300
ND6H04EE
3
2
4
1