Ricoh 450e - Manual (Page 138)

What to do if Something Goes Wrong
112
3
If you cannot Make Copies as you Want
Adjust Image
Problem Cause Action
Copies are not stapled. There are jammed staples
in the stapler. Remove jammed staples.
See
⇒
P.135 “ e Removing
Jammed Staples” .
Note
❒ After removing jammed
staples, staples might
not be ejected the first
few times you try to use
the stapler.
The number of copies ex-
ceeds the capacity of the
stapler. Check the stapler capacity.
See
⇒
P.46 “Staple”.
Staples are wrongly posi-
tioned. Originals are not set cor-
rectly. Set originals correctly. See
⇒
P.46 “Staple”.
Misfeeds occur frequently. Copy paper size setting is
not correct. Set the proper paper size.
See
⇒
P.128 “Changing the
Paper Size” .
You cannot combine sever-
al functions. Selected functions cannot
be used together. Refer to the combination
chart. See
⇒
P.106 “Combi-
nation Chart” .
Problem Cause Action
In Double Copies mode,
parts of the original image
are not copied. Combination of original
and copy paper is not cor-
rect. Select the proper original
and copy paper. See
⇒
P.20
“Originals” .
In Center/Border mode,
parts of the original image
are not copied. You set the wide erased
margin. Set the narrow margin with
the user tools. See “1. Erase
Border” in
⇒
P.149 “2. Ad-
just Image 1 /
2
” . See “2. Erase
Center” in
⇒
P.149 “2. Ad-
just Image 1 /
2
” .
Your original has narrow
margins on four sides.