Staple, Cted. see, P.46 “staple – Ricoh 450e User Manual
Page 72: P.46
Copying
46
2
C After all originals are scanned,
press the {
#
} key.
The copies are delivered to the
tray.
When setting a stack of originals
in the document feeder in SADF
mode
Reference
A Set an original in the document
feeder, then press the {
Start
}
key.
Note
❒ Start with the first page to be
copied.
B Set the next original.
C After all originals are scanned,
press the {
#
} key.
The copies are delivered to the
tray.
Staple
The optional finisher is required to use
this function.
Each copy set can be stapled together.
Limitation
❒ You cannot use the following pa-
per in this function:
• Post cards
• Translucent paper
• OHP transparencies
• Adhesive labels
• Curled paper
• Low stiffness paper
• Paper of different sizes
Note
❒ For this mode, the following limi-
tation applies. When the number
of copies exceeds the tray capacity,
copying stops. In this case, remove
the copies from the shift tray and
then resume copying.
❖
Metric version
1000-sheet
finisher
3000-sheet
finisher
Paper
size
A3L, B4L,
A4KL,
B5K
A3L, B4L,
A4KL,
B5KL
Stapler
capacity
• A4 or
smaller:
30 sheets
(80g/m
2
)
• B4 or
larger: 20
sheets
(80g/m
2
)
• A4 or
smaller:
50 sheets
(80g/m
2
)
• B4 or
larger: 30
sheets
(80g/
m
2
)(with-
out
punch)
Shift tray
capacity
(A4K)
1,000 sheets
(80g/m
2
)
3,000 sheets
(80g/m
2
)