Using sadf and thin paper modes – Ricoh 450e User Manual
Page 57
Setting Originals
31
2
Using SADF and Thin Paper
Modes
SADF mode
If you set one set of originals at a time
in the document feeder, the second
and subsequent originals can be fed
automatically without pressing the
{
Start
} key.
Limitation
❒ Copying or scanning speed might
be a little reduced.
❒ Up to 50 standard originals can be
set in the document feeder at a
time. If there are more than 50 orig-
inals, set SADF mode so that origi-
nals can be fed automatically
without pressing the {
Start
} key
each time they are set in the docu-
ment feeder.
A
Press the {
Menu
} key.
B
Press the
[
↓
Next]
key until
[DF Set-
ting]
is displayed.
C
Select
[DF Setting]
with the <>
keys, then press the
[Select]
key.
D
Press the
[Select]
key.
Note
❒ To deselect
[SADF]
, press the
[Select]
key again.
E
Press the
[Exit]
key.
F
Set one original face up into the
document feeder. Then, press the
{
Start
} key.
The Auto Feed indicator is lit.
ND2C0102
ND2C0109
ND2C0104
ND2C0103