Ricoh 450e User Manual
Page 71
Sort/Stack/Staple
45
2
❒ To use the Rotate Stack function,
two paper trays identical in size
and different in direction (KL)
are required.
Reference
For the maximum tray capacity of
the optional finisher, see
A
Press the {
Sorter
} key until the
Stack indicator (bottom) is lit.
B
To make punch holes, press the
[Punch]
key.
Limitation
❒ The optional 3000-sheet finisher
and punch kit are required to
use this function (Type 2 only).
❒ You cannot make punch holes
with Rotate Stack.
Note
❒ If you do not wish to make
punch holes, go to Step
D.
C
Make sure that
[ON]
is selected.
Then, press the
[OK]
key.
D
Enter the number of copies with
the number keys.
E
Set your originals.
When setting a stack of originals
in the document feeder
A Set a stack of originals in the
document feeder, then press
the {
Start
} key.
After all the originals are
scanned, the copies are deliv-
ered to the tray.
Note
❒ The last page should be on
the bottom.
When setting an original on the
exposure glass
A Set an original on the exposure
glass, then press the {
Start
}
key.
Note
❒ Start with the first page to be
copied.
B Set the next originals.
Note
❒ Set the original in the same
direction as the first one.
2
2
2
2
1
1
Sort
Staple
Stac
1-Sided 2-Sided
2-Sided 2-Sided
User Tools / Counter
Enhanced
Au o Reduce/
Book 2-Sided
ND2L0101
ND2C0101
ND2C0104