Ricoh 450e - Manual (Page 98)

Copying
72
2
B
Select the [Erase Ctr./Bdr.] with the
<> keys. Then, press the [Select]
key.
C
Select the part to be erased.
Center
A Press the
[Center] key.
B Enter the center width with the
number keys. Then press the
[OK] key.
Note
❒ To change the value entered,
press the { Clear/Stop } key
and enter the new value.
C Press the
[Exit] key.
Border
A Press the
[Border] key.
B Enter the border width with
the number keys. Then press
the
[OK] key.
Note
❒ To change the value entered,
press the { Clear/Stop } key
and enter the new value.
ND2C0109
ND2C0101
ND2C0104
ND2C0104
ND2C0102
ND2C0104