Ricoh 450e - Manual (Page 96)

Copying
70
2
Note
❒ To change the value entered,
press the { Clear/Stop } key and
enter the new value.
E
To specify a binding margin for
back pages, press the
[Back] key.
Note
❒ You can specify the back margin
only when the Duplex or the
Two-Sided copy with Combine
is selected.
❒ If you do not need to specify the
back margin, press the [OK] key
and go to Step
H.
F
Select [Left] (left margin) or [Right]
(right margin) with the <> keys.
G
Enter the desired margin width
the number keys. Then, press the
[OK] key.
H
Set your originals, then press the
{
Start } key.
ND2C0101
ND2C0105