Ricoh 450e User Manual
Page 78
Copying
52
2
Note
❒ Do not stack paper over the lim-
it mark; otherwise a skew image
or paper misfeeds might occur.
❒ If the beeper is turned off, light-
ly insert the copy paper until it
stops. See “Settings You Can
Change With The User Tools”
in the System Settings.
❒ When the platen cover is open,
set the direction of the copy pa-
per to L.
❒ Swing out the extender to sup-
port larger size copy paper
(larger than A4L, 8
1
/
2
"
×
11"L.
❒ Fan paper to get air between the
sheets and avoid a multi-sheet
feed.
When copying onto non-standard
size copy paper
Important
❒ You should specify the size of
copy paper to avoid paper mis-
feeds.
A Make sure the k indicator is
selected.
B Press the {
#
} key.
C Press the
[Ppr. Size]
key.
D Press the
[OK]
key.
E Enter the vertical size of the pa-
per with the number keys, then
press the {
#
} key.
Note
❒ To change the number en-
tered, press the {
Clear/Stop
}
key and enter the new num-
ber.
F Enter the horizontal size of the
paper with the number keys,
then press the
[OK]
key.
Note
❒ To change the number en-
tered, press the {
Clear/Stop
}
key and enter the new num-
ber.
❒ When you specify the paper
size, ! appears on the dis-
play to indicate bypass tray
copying.
ND2C0101
ND2C0104
ND2C0104