Ricoh 450e - Manual (Page 43)

17
1. Basics
Starting the Machine
To start the machine, turn on the op-
eration switch.
Note
❒ This machine automatically enters
Energy Saver mode or turns itself
off if you do not use the machine
for a while. See “09. Energy Saver
Mode”, “10. Auto Off Timer” of
the System Settings.
-Power switches
This machine has two power switch-
es: See
⇒
P.2 “Guide to Components”.
❖ Operation switch (right side of the op-
eration panel)
Turn on this switch to activate the
machine. When the machine has
warmed up, you can make copies.
❖ Main power switch (left side of the ma-
chine)
Do not touch the main power
switch. It should be used only by a
service representative.
Important
❒ If you leave the main power switch
off for more than about one hour,
all fax files in memory will be lost.
See “Turning Off The Power” of
the Facsimile Reference.
Turning On the Power
A
Make sure that the power cord is
plugged into the wall outlet firm-
ly and the Main Power indicator
is lit.
B
Press the operation switch to
make the On indicator light up.
The panel display will come on.
Note
❒ During the warm-up period,
you can use the Auto Start func-
tion. See
⇒
P.60 “Auto Start—
Entering Copy Job Settings Dur-
ing the Warm-up Period”
.
❒ Warm-up period is as follows:
• Type 1: less than 85 seconds
• Type 2: less than 100 seconds
r / Stop
Main
Power
On
ND1M01EE