Adjust image, Ust.front” in, P.149 “2 – Ricoh 450e User Manual
Page 175: P.149 “2. adjust, Image, P.149 “2. adjust im, P.149 “2. ad, Just image, P.149 “2. adjust image
Settings you can Change with the User Tools
149
4
2. Adjust Image
1
/
2
Reg. User Code
You can register user codes.
Note
❒ Up to 50 user codes (8 digits or less) can be registered.
Chg/Del User Code
You can change or delete user codes.
Note
❒ The number of copies made under the old code is added
to that made under the new user code.
❒ The number of copies made under the deleted code is
also deleted.
Counter List Print
You can print a list of counters shown by user code.
Note
❒ To stop the printing, press the
[Cancel]
key.
Menu
Description
1. Erase Border
The default setting of the width of the erased margins in the
Erase Border mode can be changed as follows:
• Metric version: 3 – 50mm in 1mm steps
• Inch version: 0.1 – 2.0" in 0.1" steps
Note
❒ Default:
• Metric version: 10mm
• Inch version: 0.4"
2. Erase Center
The default setting of the width of the erased margins in the
Erase Center mode can be changed as follows:
• Metric version: 3 – 50mm in 1mm steps
• Inch version: 0.1 – 2.0" in 0.1" steps
Note
❒ Default:
• Metric version: 10mm
• Inch version: 0.4"
Menu
Description