Roland HP109-PE - Manual (Page 25)

Chapter 2. Performance
23
ENGLISH
ENGLISH
ENGLISH
ENGLISH
ENGLISH
ENGLISH
Splitting the Keyboard Into Two Sections for Four-Hand
Performances (Twin Piano Mode)
You can divide the keyboard into two separate sections, allowing two people to perform in the same register.
1. While holding down the [Split] button, press the
[Piano] button.
The [Split] button’s indicator will light, and Twin Piano
Mode is switched on.
2. To exit the function, while holding down the
[Split] button, press the [Piano] button once more.
● The following occurs when Twin Piano Mode is switched
on:
• The keyboard is divided into two separate sections, and
the pitch changes.
• The right pedal now acts as the damper pedal for the
right keyboard section, and the left pedal functions as
the damper pedal for the left keyboard section.
• The center pedal now functions as the Sostenuto pedal
for the right keyboard section.
• If recording is in progress or the instrument is in
recording standby, recording is stopped or recording
standby is cancelled. The [Rec] button is disabled while
Twin Piano Mode is active.
• If the Split function happens to be on, it is switched off.
• The same tone and effects are used on both the left and
right sides. If the piano is in Split Play before switching
Twin Piano Mode on, then the tone selected for the
right hand in Split Play is used.
C4 C5 C6 C7 C8 C3 C2 C1
C4 C5 C6 C3 C4 C5 C3 C6
The damper resonance function is not operational in
Twin Piano Mode.
NOTE