Ricoh Network Guide - Manual (Page 103)

Remote Maintenance by telnet
97
4
❖ ❖ ❖ ❖ Encap type
m s h > n e t w a r e e n c a p
{802.3|802.2|snap|etherne
t2|auto}
❖ ❖ ❖ ❖ Remote Printer Number
msh> netware rnum
❖ ❖ ❖ ❖ Timeout
msh> netware timeout
❖ ❖ ❖ ❖ Printer server mode
msh> netware mode pserver
msh> netware mode ps
❖ ❖ ❖ ❖ Remote printer mode
msh> netware mode rprinter
msh> netware mode rp
❖ ❖ ❖ ❖ NDS context name
msh> netware context
❖ ❖ ❖ ❖ SAP interval
msh> netware “sap_interval”
❖ ❖ ❖ ❖ Setting login mode for file server
msh> netware login server
❖ ❖ ❖ ❖ Setting login mode for NDS tree
msh> netware login tree
❖ ❖ ❖ ❖ Setting login mode for NDS tree name
msh> netware tree “NDS name”
passwd
Use the “passwd” command to
change the remote maintenance pass-
word.
❖ ❖ ❖ ❖ Changing the Password
msh> passwd
• Enter the current password.
• Enter the new password.
• Enter the new password once
again.
Note
❒ Be sure not to forget or lose the
password.
❒ The password can be entered us-
ing up to 32 alphanumeric charac-
ters. Passwords are case-sensitive.
For example, "R" is not the same as
"r".
prnlog
Use the “prnlog” command to obtain
printer log information.
❖ ❖ ❖ ❖ Print logs display
msh> prnlog
• Displays 16 previous print jobs.
msh> prnlog “ID Number”
• Specify the ID number of the
displayed print log information
to display additional details
about a print job.
Note
❒ For details about displayed con-
tents, see p.112 “Getting Printer In-
formation over the Network”.