Ricoh Network Guide - Manual (Page 18)

Connecting and Setting Up
12
2
Confirming the Connection
AAAA
Make sure the LED of the IEEE
802.11b interface unit is lit.
❖ When using in infrastructure mode
1. If [LAN Type] on the [Interface Set-
tings] /[Network] screen is not set to
[IEEE 802.11b] , it does not light, even
if the main power is on.
2. If it is connected properly to the
network, the LED is green when in
infrastructure mode. If the LED is
blinking, the machine is searching
for devices.
❖ When using in ad hoc mode/802.11
ad hoc mode
1. If the IEEE 802.11b interface unit
is working, it is lit in orange.
2. If it is connected properly to the
network, the LED is green when in
ad hoc mode or 802.11 ad hoc mode.
If the LED is blinking, the machine
is searching for devices. The LED
will light after a few seconds.
BBBB
Print the configuration page to
verify settings.
Reference
For more information about
printing a configuration page,
see Printer Reference.
ZZZ024S
1
2
ZZZ024S
1
2