Ricoh Network Guide - Manual (Page 64)

Using a Printer Server
58
3
The print server setting is com-
plete. Each client must be set to re-
ceive print notification.
Note
❒ Current printing jobs restart
from the beginning after the
spooler pauses briefly.
❒ When the expansion function is
not used, the function is auto-
matically set as available.
❒ If you log on using an account
that does not have Administra-
tor privileges, the client may not
be notified.
Setting a Client
A
From the [Start] button on the task
bar, point to [Program], point to
[SmartDeviceMonitor for Client]
, and
then click [Setting Expansion Func-
tion]
.
A dialog box for setting the expan-
sion function appears.
B
Select the [Use the expansion func-
tion]
check box in [Notify Printing].
C
Select the [Notify when using the print
server]
check box.
D
Click [OK].
The dialog box for setting the ex-
pansion function closes. The client
setting is completed.
Note
❒ Set the printing notification func-
tion on the printer driver as well
as on SmartDeviceMonitor for
Client.