Ricoh Network Guide - Manual (Page 29)

Setting Up the Machine on a Network
23
2
*1 Appears when the optional IEEE 1394 interface board is installed.
*2 Appears when the optional IEEE 802.11b interface unit is installed.
If Ethernet and 802.11b (wireless LAN) are both connected to the machine, the select-
ed interface has priority.
*3 Check [Effective] is selected for TCP/IP.
*4 If you select [On] for [POP before SMTP], select this function as well.
*5 If you select [On] for [POP before SMTP], check the port number for [POP3].
IEEE 802.11b
(wireless LAN) Interface Settings/
Network
See p.37 “Network”.
IP Address $
Gateway Address $
DNS Configuration
❍
DDNS Configuration
❍
Domain Name
❍
WINS Configuration
❍
LAN Type *2
$
Ethernet Speed ❍
Effective Protocol *3
$
Permit SNMP V3 Communication ❍
Permit SSL / TLS Communication
❍
Host Name
❍
Interface Settings/
IEEE 802.11b
*2
See p.41 “IEEE
802.11b”.
Communication Mode
$
SSID Setting
❍
Channel ❍
WEP (Encryption) Setting
❍
Transmission Speed ❍
File Transfer
See p.42 “File Trans-
fer”.
SMTP Server $
SMTP Authentication ❍
POP before SMTP ❍
POP3 Setting *4
❍
Administrator's Address ❍
E-mail Communication Port *5
❍
Program / Change / Delete E-
mail Message ❍
Program / Change / Delete
Subject ❍
Scanner Recall Interval Time ❍
Number of Scanner Recalls ❍
Interface Settings