Ricoh Network Guide - Manual (Page 99)

Remote Maintenance by telnet
93
4
❖ ❖ ❖ ❖ Specifying the record overlap opera-
tion
m s h > d n s o v e r l a p { u p -
date|add}
• You can specify operations per-
formed when records overlap.
• update
To delete old records and regis-
ter new records.
• add
To add new records and store
the old records.
• When CNAME overlaps, it is al-
ways changed, irrespective of
settings.
❖ ❖ ❖ ❖ CNAME registration
msh> dns cname {on|off}
• You can specify whether to reg-
ister CNAME.
• {on} means "active" and {off}
means "inactive".
• The CNAME registered is the
default name beginning with
r n p . C N A M E c a n n o t b e
changed.
❖ ❖ ❖ ❖ A records registration
msh> dns arecord {dhcp|own}
• {dhcp}
You can specify the method of
registering an A record when
the dynamic DNS function is
enabled and DHCP is used.
• {own}
To register an A record using
the printer as the DNS client.
The DNS server address and the
domain name already designat-
ed are used for the registration.
❖ ❖ ❖ ❖ Record updating interval settings
msh> dns interval “time”
• You can specify the interval af-
ter which records are updated
when using the dynamic DNS
function.
• The updating interval is speci-
fied hourly. It can be entered be-
tween 1 and 255 hours.
• The default is 24 hours.
domainname
Use the "domainname" command to
display or configure the domain
name settings.
You can configure the Ethernet inter-
face, IEEE 1394 interface, or IEEE
802.11b interface.
❖ ❖ ❖ ❖ View settings
The following command displays
the current domain name:
msh> domainname
❖ ❖ ❖ ❖ Interface domain configuration
msh> domainname “interface_
name”