Ricoh Network Guide - Manual (Page 153)

Specifications
147
6
*1 The optional IEEE 1394 interface board supports only TCP/IP.
*2 Use the SmartDeviceMonitor for Client port.
*3 To use IPP under Windows XP, Windows Server 2003, use the Standard IPP port.
Note, in SmartDeviceMonitor for Client however, this port does not support digest
access authentication.
*4 This can be used when the PostScript 3 module is installed.
*5 Under Windows, this function can be used with TCP/IP and NetBEUI.
*6 SMB using NetBEUI is unavailable.