Ricoh Network Guide - Manual (Page 91)

Using SmartDeviceMonitor for Admin
85
4
Viewing and Deleting Spool
Print Jobs
AAAA
Start SmartDeviceMonitor for Admin.
BBBB
On the [Group] menu, point to [Search
Device]
, and then click [TCP/IP],
[IPX/SPX] or [TCP/IP(SNMPv3)].
A list of machines using the select-
ed protocol appears.
Note
❒ Select the protocol of the ma-
chine whose configuration you
want to change.
❒ If you are using TCP/IP SNMP
v3, enter the user authentication.
CCCC
Select a machine.
DDDD
On the [Tools] menu, click [Spool
Printing Job List(Printer)]
.
A Web browser opens and the dia-
log box for entering the user name
and password for the Web Image
Monitor administrator appears.
For details about the user name
and password, consult your net-
work administrator.
EEEE
Check the Spool Printing Job List
that appears in the Web Image
Monitor.
To delete the Spool Printing Job,
select the document you want to
delete and then click [Delete].
Note
❒ To display Spool Printing Job List,
spool must be set to [Enable] on
Web Image Monitor in advance.
Reference
For details, see Help in Spool
Printing Job List area.
Managing Address
Information
AAAA
Start SmartDeviceMonitor for Admin.
BBBB
On the [Group] menu, point to [Search
Device]
, and then click [TCP/IP],
[IPX/SPX] or [TCP/IP(SNMPv3)].
A list of machines using the select-
ed protocol appears.
Note
❒ Select the protocol of the ma-
chine whose configuration you
want to change.
❒ If you are using TCP/IP SNMP
v3, enter the user authentication.
CCCC
Select a machine.
DDDD
On the [Tools] menu, click [Address
Management Tool]
.
The dialog box for entering the
user name and password appears.
EEEE
Enter the user name and pass-
word, and then click [OK].
Address Management Tool starts.
For details about the user name
and password, consult your net-
work administrator.
Reference
For details, see Address Manage-
ment Tool Help.