Oki 59502 - Manual (Page 103)

|
User’s Guide: English 103
6 Enter the desired location using the Speed Dial number
or numeric keypad, press Start.
7 The machine will scan the document(s) into memory and
begin faxing to the key relay station.
8 If all memory is used, the display will show Memory
Overflow, Send Scanned Pages?
9 To send scanned pages, press Enter.
Using Your Machine as a Relay Key Station
(Hub)
Your machine can act as the relay key station (hub), which
receives the original document from the relay initiating
station and then forwards the document to the destination
machines.
Your machine can send a confirmation report to the relay
initiating station when the relay fax session is complete.
This confirmation report is called the Relay Broadcast
Report.
Before you use your machine as a relay key station (hub),
you must:
· program the number(s) of the destination machine(s) into
your machine
· create a group or groups of the destination machine
numbers
· create a relay password for your machine
· determine how the relay initiating station wants to handle
the Relay Broadcast Confirmation Report
· determine if you want to print the relay fax when it arrives
at your machine
! Be sure to record your relay password. Keep the record
in a safe place. If you forget the password, you will
need to contact a Service Dealer for assistance.
Program the Destination Numbers
Collect the contact numbers for the destination machines to
which you will forward the relay fax.
Each number must be programmed into your machine as a
Speed Dial.
See “Programming Speed Dial Numbers.”
Create the Destination Group(s)
The Speed Dial numbers of the contact numbers (of the
destination machines) must be programmed as a group or
groups in your machine.