Oki 59502 - Manual (Page 117)

|
User’s Guide: English 117
Restricted Access ID
Speed access no. 06
This is a 4-digit numeric password that must be entered to use
the machine when it is set in the Restrict Access mode.
Up to 24 passwords can be registered at one time.
! User Function 19 (Restrict Access Mode) must be set to
ON before the Restrict Access ID may be set.
! Be sure to record all Restrict Access IDs. Keep the
record in a safe place. If you forget a Restrict Access
ID, you will need to contact a Service Dealer for
assistance.
To set restricted access ID
! User Function 19 (Restrict Access Mode) must be set to
ON before the Restrict Access ID may be set.
! Be sure to record the Restrict Access ID(s). Keep the
record in a safe place. If you forget the Restrict Access
ID, you will need to contact a Service Dealer for
assistance.
1 Press Menu/Exit to enter menu.
2 Enter speed access no. 06, wait.
3 Enter department number (1-24), press Enter.
4 Input 4-digit password (0000-9999) using the numeric
keypad.
5 If the number is already registered, INVALID ID displays.
6 Input another 4-digit password, press Enter.
7 Repeat steps 3-6 until all the department numbers you
want to use have been registered.
8 Press Menu/Exit to return to standby mode.
To use restricted access ID
Enter the 4-digit restricted access ID (password) at the prompt
for Enter ID [xxxx].
To cancel restricted access ID
1 Press Menu/Exit to enter menu.
2 Enter speed access no. 06, wait.
3 Enter department number (1-24), press Enter.
4 Enter a 4-digit password using the numeric keypad, press
Enter.
5 If ID matches a registered number, ID Close displays. If ID
does not match a registered number, Invalid ID displays.
6 At ID Close press Enter to confirm ID cancellation.
7 Press Menu/Exit to return to standby mode.