Oki 59502 - Manual (Page 118)

|
OKIFAX 5750/5950 118
Service Function Settings
Service function settings affect the way a facsimile machine
operates. If any of the following settings need to be changed,
please contact the nearest OKIFAX dealer and request service.
Long Document Scanning/Transmission
(Long Doc. Scan)
Normally the machine will not scan documents longer than
356 millimeters (14 inches). With this function set to ON, the
machine is capable of scanning and transmitting a document
continuously for up to one hour or 1500 millimeters
(61.75 inches) whichever comes first, before a logical jam
occurs.
MDY/DMY
This setting controls how the machine displays and prints the
date (mm/dd/yy or dd/mm/yy).
Time/Date Print
This setting controls if and how the time and date are printed
on faxes transmitted by the machine. The machine can be set
to print/not print time and date, print time and date at the top
of the first page only, or print time and date at the top of
every page.
TSI Print
When TSI Print is set to ON, the telephone number of the
sending machine prints at the top of each page of the fax.
The default setting is ON.
! United States law requires that this information appear
on every facsimile.
See “Setting Basic Features, Setting Your Fax
Machine’s ID.”