Oki 59502 - Manual (Page 116)

|
OKIFAX 5750/5950 116
modes—TEL, TEL/FAX, or TAD—will override
Distinctive Ring.
! This feature may not work properly if you have a
telephone other than a genuine Oki optional handset
connected to your fax machine.
Setting Distinctive Ring
To set up your fax machine to recognize another ring pattern:
1 Press the Menu/Exit key to enter the menu.
2 Enter speed access number 67.
3 When the display shows the parameter you want, press
ᮢ
or
ᮡ to select the setting, press Enter.
4 Press Menu/Exit to return to standby mode.
Memory Password
Speed access no. 05
This is a 4-digit numeric password used when the machine is
operating in the Memory Only Reception Mode (MEM).
When the machine is in this mode, and you don’t know the
password, you can’t make changes or print memory data.
Only one memory password can be programmed in your
machine.
Setting a Memory Password
1 Press Menu/Exit to enter menu.
2 Enter speed dial access no. 05, wait.
3 Enter 4-digit numeric password (0000-9999) using
numeric keypad, press Enter.
4 Press Menu/Exit to return to standby mode.
! Be sure to record the password. Keep the record in a
safe place. If you forget the password, you will need to
contact a Service Dealer for assistance.
Cancelling a Registered Password
1 Press Menu/Exit to enter menu.
2 Enter speed dial access no. 05, wait.
3 Enter 4-digit numeric password (0000-9999) using
numeric keypad, press Enter.
4 If the password matches the registered number, Password
Close? displays. If numbers do not match, Invalid
Password displays.
5 At Password Close, press Enter to confirm password
cancellation.
6 Press Menu/Exit to return to standby mode.