Oki 59502 - Manual (Page 73)

|
User’s Guide: English 73
Using the Numeric Keypad
1
Dial as you would on a normal telephone.
2 If you make a mistake, press the DEL key to back up one
space, then enter the correct number.
3 Press the Start key.
Using An External Telephone
To use this feature, you must have an external, optional
handset or telephone connected to your fax machine.
1 Pick up the receiver and dial the number. If the receiving
machine is in automatic reception mode, a high-pitched
tone will be heard.
2 If someone answers, request that they press the Start key
on their machine.
3 You (the sender) will also need to press the Start key on
your machine.
Rejecting Unsolicited Fax Messages
Closed Network
Speed Access 21
If closed network is on, your machine will ONLY accept faxes
from numbers programmed as Speed Dial Numbers.
This keeps out unwanted faxes (such as advertising).
You can also set your machine to send faxes to ONLY the
numbers programmed as Speed Dial Numbers.
The Closed Network settings are:
· Limited reception (RX)
· Limited transmission and reception (TX/RX)
· No limitations (OFF). This is the default setting.
! If Closed Network is set to TX/RX or RX, your machine
will ONLY accept faxes from numbers programmed as
Speed Dial Numbers.
Any numbers NOT programmed as Speed Dials will be
rejected by the fax machine.