Oki 59502 - Manual (Page 57)

|
User’s Guide: English 57
Dial Tone Detect
Speed access no. 43
This function allows your machine to wait for and detect a
dial tone before dialing. Set to ON, a dial tone must be
detected.
Available settings are ON and OFF.
ON is the default setting.
Busy Tone Detect
Speed access no. 44
This function allows your machine to detect a busy tone
when sending a fax.
Available settings are ON and OFF.
ON is the default setting.
Tone/Pulse (MF/DP)
Speed access no. 45
This function controls which method your machine uses for
dialing.
DP: dial pulse dialing, which uses monotone pulses to dial a
number like a rotary telephone,
MF: multi-frequency dialing (touch tone), which uses
different tones to dial a number.
MF is the default setting.
Tone (MF) Duration
Speed access no.49
If the machine is set to the MF dialing method, this function
controls the duration of the tones used for dialing.
Tone duration varies by country.
Available settings are 75, 85, and 100 ms.
100 ms is the default setting.
PBX LINE
Speed access no. 50
This function must be ON if your machine is connected to a
PBX. Once this function has been turned on and the access
digit function has been programmed, your machine
recognizes the access digit you use in your PBX to get an
outside line.
Available settings are on and OFF.
OFF is the default setting.
To change this setting, see “Setting Basic Features,
Connecting to a PBX.”