Oki 7300e - Manual (Page 105)

Novell NetWare 104
Printing the Network Interface Card Configuration Sheet
The printer’s configuration page reports information that is required
for NetWare configuration. To print a configuration page, while the
printer is switched on, depress the NIC’s push-button for three
seconds and then release.
The information that you require is the printer’s Ethernet address. It is
displayed at the top of the first page under the title Diagnostic report,
and is displayed
in bold below.
*** Diagnostic report ***
ROM Check:Okstat:F05B FFFF 0000 0000
RAM Check:Okstat:0000 0000 0000 0000
NIC Check: Ok Addr:*
00:80:92:07:DB:85
100BASE-TX
The first six digits of the Ethernet address are the same for all
OkiLan7300e network cards. The last six digits of the Ethernet
address are unique to each card
This is all the information that is required to setup the OkiLan7300e
for NetWare.
Setup Utilities
Use NWAdmin32 or the Pconsole utility to create and setup NetWare
printer objects. Please refer to Novell documentation for instructions
on how to achieve this.
Use the OKI Network Card Setup Utility (AdminManager) or other
printer manager software, (Web browser, JetAdmin, etc.) to configure