Port 9100 – Oki 7300e User Manual
Page 96
Microsoft Windows 95
7.
The [Welcome to the Add Standard TCP/IP Printer Port Wizard]
will appear.
8.
Select [Next] and provide the following information. Enter
[Printer name or IP address], for example: 192.168.1.31. If the
above IP address is entered, the Port Name will default to
IP_192.168.1.31.
9.
Select [Next]. [Additional Port Information Required] displayed.
10. Under [Device Type], select [Custom] then [Settings].
11. Ensure [Protocol] is set to [LPR].
12. Ensure [Queue Name] is "lp" and [SNMP Status Enabled] is
deselected.
13. Select [OK].
14. Follow on screen instructions to finish installing the printer.
Port 9100
1.
Select [Start], [Settings], [Control Panel]. and [Printers and Other
Hardware].
2.
Select [Printers and Faxes].
3.
Click [Add Printer] and then select [Next].
4.
Select [Local printer attached to this computer], clear the
[Automatically detect and install my Plug and Play printer] check
box, and then select [Next].
5.
Select [Create a New Port] and select [Type Standard TCP/IP
Port].
6.
Select [Next].
7.
The [Welcome to the Add Standard TCP/IP Printer Port Wizard]
will appear.