Oki 7300e User Manual
Page 52
Configuration 51
5.
Enter [root] in User name and your password (default is the last
six digits of the Ethernet address) in Password and click [OK].
For example: For Ethernet address 00:80:92:01:00:D2, a default
password is [0100D2]. The Ethernet address (MAC address) is
displayed during the self-diagnostic test.
6.
After the new values are transmitted to the network card, the
following screen is displayed. If a different message is
displayed, check the settings.
The root password can be changed to allow you to configure the
OkiLAN 7300e and printer by using a Web browser. The default
password is the last six digits of the MAC address.
To change the root password for configuration via a Web browser,
access [http://OKILAN 7300e IP address or hostname>/
system_password.htm]. After inputting the current root password,
this screen is displayed:
Input a new root password in [New Admin Password] and [Confirm
New Admin Password] then select [Submit] button. If your request is
successfully processed, the following screen is displayed:
The root password for configuration via Web browser is different for
AdminManager/TELNET/FTP. These passwords can be set in
AdminManager or TELNET.