Oki 7300e - Manual (Page 38)

Configuration 37
Help Menu
In the [Help] menu, [About] is available as well as revision information
for AdminManager.
Using a Web browser
If the OkiLAN 7300e is connected to the network using TCP/IP, its
settings and the printer menu settings can be configured using a Web
browser, such as Microsoft Internet Explorer Version 3.0 and higher,
or Netscape Navigator version 3.0 and higher. No guarantees are
offered for other browsers. Refer to the relevant manuals for details of
how to launch and use the browser.
The network addresses used in this manual are shown as examples
only. Network addresses used in your installation must be generated
from your own network. To apply configuration changes using a Web
browser, you will be prompted for a username and password.The
username is [root] and the default password is the last six digits of the
Ethernet address.
The following explanation uses Windows 95 and Microsoft Internet
Explorer version 4.0 with the C7400 as an example.
1. Configure the IP Address, Subnet Mask and Gateway for the
network card. Launch the Web browser, enter the IP Address of
the network interface card in [Address (Location/Position)] and
press the [Enter] key. The Printer Status screen is displayed.
2. Click the items to be changed in the left column. For more details
of corresponding items in WEB and TELNET equivalents, see the
description in the Configurable Items and Default Values table
starting on page 59.