Oki 7300e - Manual (Page 90)

Microsoft Windows 89
10. On selecting [Yes] you will be asked if [You set-up the queue
from the Wizard]?
Do you use the EtherTalk protocol?
EtherTalk is the required protocol for printing data from the Macintosh
environment.
Do you use the NetBEUI protocol?
Using NetBEUI makes it easy to manage your OKI product and print
within the network environment of Windows.
11. Confirm your configuration. If everything is correct, select
[Execute] to apply the configuration. Set-up has now been
completed. Select [Finish].
Now that both Windows and the printer have been configured to use
TCP/IP, the next step is to configure Windows to print to the network
printer.
Windows 95/98/Me
When printing using TCP/IP the OkiLPR utility is the only option to use.
The following procedure should be used.
When installing the driver, ensure it is installed as a local printer and
not a network printer. Ensure the appropriate printer driver has been
installed in Windows.
Install the OkiLPR utility as described on page 80 of this manual and
add the printer installed earlier.