Oki 7300e - Manual (Page 123)

UNIX 122
c. Activate the smit command and convert to the item [Add print
queue].
# smit mkrque
d. Select [remote] (the printer connected to the remote host)
from [Type of connection].
e. Select [Standard procedure] from Type of remote print.
f. Carry out the following settings in [Add a standard remote
print queue]. If the configuration differs from below,
configure according to environment.
Example: fr direct output port lp with print queue C7400_lp and print
server C7400
Queue to be added
“C400_lp”
Host name of the
remote server “C7400”
Queue name of the
remote server “lp”
Type of print spooler
of the remote server “BSD”
Description of printer name
of the remote server “Optional comment”
LPD Printing
Line Printer Daemon (LPD) is the most common protocol for printing
with TCP/IP to a network printer. Refer to the workstation’s manual for
details of lpr and lp commands. The following explanation in this
section uses the printing of print file test.prn with printer name
C7400_lp as an example.