Using adminmanager – Oki 7300e User Manual
Page 18
Configuration 17
5.
Follow the on-screen instructions.
>
The NetWare Client 32 or IntranetWare Client should be installed on
the PC used for the creation of network queues. Installation enables
the user to create network queues and perform other functions.
6.
If the settings are correct, click [Execute]. The new settings are
transmitted to the network card but the network card is still
operating with pre-transmission settings.
7.
Click [Finish] to validate the new settings. Depending on the model,
the printer may have to be switched off and on again.
Using AdminManager
AdminManager is a powerful Microsoft Windows-based utility to configure
all of OkiLAN 7300e’s functions easily and intuitively by using a graphical
user interface.
Configuration requires a PC with Windows 95/98/Me, Windows 2000
Advanced Server/Professional or Windows NT Server 4.0/Work-station
4.0, Windows XP running TCP/IP or IPX/SPX (NetWare).
This utility can only be used on a PC that can be connected to the network
with TCP/IP or IPX/ SPX and must be used on a PC that is located in the
same segment as the printer.