Olympus PT-E05 - Manual (Page 47)

EN 6
En
Insert the silica gel ......................................................................................................... 24
Check the loading status ...................................................................................................... 24
Seal the Case....................................................................................................................... 25
Check the operation of the loaded camera .......................................................................... 26
Perform the final checks....................................................................................................... 26
Visual Inspection............................................................................................................ 26
Final Test ............................................................................................................................. 27
4.Underwater Shooting ............................................................................................28
How to use the hand strap ................................................................................................... 28
Hold the Case carefully ........................................................................................................ 28
Confirm that you can see an image in the pick-up finder or LCD monitor. .................... 28
Gently press the shutter lever. ....................................................................................... 28
5.Handling After Shooting .......................................................................................29
Wipe off any waterdrop ........................................................................................................ 29
Unload the digital camera .................................................................................................... 30
Wash the Case with pure water ........................................................................................... 31
Dry the Case ........................................................................................................................ 31
6.Maintaining the Waterproof Function ..................................................................32
Remove the O-ring ............................................................................................................... 32
Procedure ...................................................................................................................... 32
Remove any sand, dirt, etc. ................................................................................................. 32
Install the O-ring ................................................................................................................... 33
How to Apply Grease to the O-ring ...................................................................................... 33
Replace consumable products ............................................................................................. 34
Maintenance of the threaded sections on the TTL cable and TTL cable connector............. 34
Maintenance of the TTL Connector Cap .............................................................................. 34
7.Appendix ................................................................................................................35
Q & A on use ........................................................................................................................ 35
Specifications ....................................................................................................................... 39
PT-E05_EN.Book Page 6 Tuesday, June 17, 2008 11:11 AM