Olympus PT-E05 - Manual (Page 52)

EN 11
En
Whether or not the Case’s zoom ring can control the camera’s zoom ring and focus ring depends on
which lens is mounted on the digital camera. For details, refer to the instruction manual of the optional
waterproof port.
*1. The optional PPZR-E04 focusing gear is required.
*2. The focus ring on the lens can be turned 360° by using the optional PPZR-E04.
*3. The optional PPZR-E05 focusing gear is required.
As of June 2008.
How to control the power switch lever
How to use the zoom dial
The Case’s zoom dial can be used to control the digital
camera’s zoom ring or its manual focus ring. Which
operation is available depends on the lens being used.
Waterproof
Port
Applicable
Lens
Zoom Ring Focus Ring Note
PPO-E01
14-45 mm Controllable Not Controllable
Only autofocusing is
possible.
35 mm Macro Not Controllable Controllable *1
The lens’ focus ring can be
rotated by 360°.
PPO-E02
14-54 mm
11-22 mm
Controllable Not Controllable
Only autofocusing is
possible.
PPO-E03 50 mm Macro Not Controllable Controllable *2
Manual focusing is possible
but the MF ring rotation
range is limited to 180°.
PPO-E03
+PPO-E01 50 mm Macro
+EC14
Not Controllable Not Controllable
Only autofocusing is
possible.
PPO-E04
+PER-E02
7-14 mm Controllable Not Controllable
Only autofocusing is
possible.
PPO-E04 8 mm Fisheye Not Controllable Controllable *3
The lens’ focus ring can be
rotated by 360°.
PPO-E05 14-42 mm Controllable Not Controllable
Only autofocusing is
possible.
Move the power switch lever of the Case to turn the
camera ON and OFF.
CAUTION:
When the digital camera has not been operated for a certain period of time, the sleep mode (standby status)
will be engaged. The duration before the sleep mode is engaged can be set on the digital camera.
To exit the sleep mode (and restore camera functions), press any button (such as the shutter button).
For details, refer to your digital camera’s instruction manual.
Power switch lever
PT-E05_EN.Book Page 11 Tuesday, June 17, 2008 11:11 AM