Olympus PT-E05 - Manual (Page 63)

EN 22
En
3 When using a slave flash from a non-Olympus manufacturer, push the # button on the camera to
pop up its built-in flash.
4 After attaching the camera table to the digital camera, slide the camera table into the Case’s camera
table-loading groove. Do not insert the camera table by force. Slide it in gently while checking that
the digital camera does not interfere with the internal parts of the Case.
CAUTION:
The built-in flash should be popped up before loading the camera in the Case. Once the case has been
sealed, the built-in flash cannot be popped up from outside the Case. To pop up the flash after the case has
been sealed, change the camera’s automatic pop-up setting to ON, set the camera to a scene mode other
than
AUTO and underwater modes, point the camera at the subject and half-press the shutter button so that
the built-in flash pops up automatically.
# button
PT-E05_EN.Book Page 22 Tuesday, June 17, 2008 11:11 AM