Quadra-Fire QF130 - Manual (Page 32)

Quadra-Fire • QFI30, QFI35 • 2227-900 Rev. H • 1/11 32
Log #4 (SRV2227-705): Mate the slot on the bottom of the log, shown in Figure 12, with the log pin located on the burner
surface. The notch on the right end of the log should mate with the grate bar. See Figure 11.
Log #5 (SRV2227-706): Place the left end of the log on the fl at spot of log as shown in Figure 6. The right end of log should
rest on the burner and touches the grate bar as shown in Figure 13.
SLOT
LOG END
CONTACTS
GRATE BAR
LOG END
RESTS ON
FLAT SPOT
Log #6 (SRV2227-704): Rest the left end of Log #6 on the burner. Mate the notch on the left end of log with the grate bar.
The log should rest on both log grooves as illustrated in Figure 9 and Figure 10.
Figure 12. Log #4
Figure 13. Log #5
Figure 14. Place Log #6
MATE
NOTCH WITH
GRATE BAR
LOG
GROOVES
5
6
2227-935