C. clear space, E. fixed glass assembly, D. decorative doors, fronts and surrounds – Quadra-Fire QF130 User Manual

Page 8: G. ipi battery tray/battery installation

Advertising
background image

Quadra-Fire • QFI30, QFI35 • 2227-900 Rev. H • 1/11

8

C. Clear Space

WARNING! DO NOT place combustible objects in front

of the fi replace or block louvers. High temperatures may

start a fi re. See Figure 2.2.
Avoid placing candles and other heat-sensitive objects on

mantel or hearth. Heat may damage these objects.

Figure 2.2 Clear Space

E. Fixed Glass Assembly

See

Section 12.H.

D. Decorative Doors, Fronts and Surrounds

WARNING! Risk of Fire! Install ONLY doors, fronts or

surrounds approved by Hearth & Home Technologies.

Unapproved doors or fronts may cause appliance to over-

heat.
This appliance has been supplied with an integral

barrier to prevent direct contact with the fi xed glass

panel. DO NOT operate the appliance with the barrier

removed.
Contact your dealer or Hearth & Home Technologies if

the barrier is not present or help is needed to properly

install one.
For more information refer to the instructions supplied with

your decorative door or front.

F. Remote Controls, Wall Controls and Wall

Switches

Follow the instructions supplied with the control installed

to operate your fi replace:
For safety:
• Install a switch lock or a wall/remote control with child

protection lockout feature.

• Keep remote controls out of reach of children.
See your dealer if you have questions.

CLEAR SP

ACE

3 FT

. IN FRONT OF FIREPLACE

APPLIANCE INSTALLED IN EXISTING

SOLID FUEL FIREPLACE

G. IPI Battery Tray/Battery Installation

The IntelliFire Plus

TM

system has a battery backup option.

Battery longevity and performance will be affected by the

service temperatures of this appliance. Batteries should only

be used as a power source in the event of an emergency

such as an outage.
NOTICE: Batteries should only be used as a power source

in the event of an emergency such as an outage.

Advertising