Transition Networks SISPM1040-182D - Manual (Page 145)

Transition Networks SISPM1040-182D-LR
Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
137
interface. switch(config-if)#stp-admin-edge
True
stp-admin-non-stp
[True|False]
I Admin NonSTP of
STP priority on this
interface.
switch(config)#interface
fastEthernet 2
switch(config-if)#stp-admin-non-
stp False
show spanning-tree E Displays a summary of
the spanning-tree
states.
switch>show spanning-tree
no spanning-tree G Disable spanning-tree. switch(config)#no spanning-tree
QOS Commands Set
Commands Level Description Example
qos policy
[weighted-fair|strict]
G Select QOS policy
scheduling
switch(config)#qos policy
weighted-fair
qos prioritytype
[port-based|cos-
only|tos-only|cos-
first|tos-first]
G Setting of QOS priority
type
switch(config)#qos prioritytype
qos priority portbased
[Port]
[lowest|low|middle|high]
G Configure Port-based
Priority
switch(config)#qos priority
portbased 1 low
qos priority cos
[Priority][lowest|low|mid
dle|high]
G Configure COS
Priority
switch(config)#qos priority cos 0
middle
qos priority tos
[Priority][lowest|low|mid
dle|high]
G Configure TOS Priority switch(config)#qos priority tos 3
high
show qos P Displays the
information of QoS
configuration
Switch#show qos
no qos G Disable QoS function switch(config)#no qos