Transition Networks SISPM1040-182D - Manual (Page 83)

Transition Networks SISPM1040-182D
Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
6.17 Rate Limiting
You can set up every port’s bandwidth rate and frame limitation type.
„ Ingress Limit Frame type: select the frame type that wants to filter. There are four
frame types for selecting:
¾ All
¾ Broadcast/Multicast/Flooded Unicast
¾ Broadcast/Multicast
¾ Broadcast only
Broadcast/Multicast/Flooded Unicast, Broadcast/Multicast and Bbroadcast
only types are only for ingress frames. The egress rate only supports All type.
Rate Limiting interface
„ All the ports support port ingress and egress rate control. For example, assume port
1 is 10Mbps, users can set it’s effective egress rate at 1Mbps, ingress rate at
500Kbps. The switch performs the ingress rate by packet counter to meet the
specified rate