Transition Networks SISPM1040-182D - Manual (Page 156)

Transition Networks SISPM1040-182D-LR
Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
148
sntp daylight-offset
[Minute]
G Set offset of daylight
saving time, if SNTP
function is inactive,
this command can’t be
applied.
switch(config)#sntp daylight-
offset 3
sntp ip
[IP]
G Set SNTP server IP, if
SNTP function is
inactive, this
command can’t be
applied.
switch(config)#sntp ip 192.169.1.1
sntp timezone
[Timezone]
G Set timezone index,
use “show sntp
timzezone” command
to get more
information of index
number
switch(config)#sntp timezone 22
show sntp P Show SNTP
information
switch#show sntp
show sntp timezone P Show index number of
time zone list
switch#show sntp timezone
no sntp G Disable SNTP function switch(config)#no sntp
no sntp daylight G Disable daylight
saving time
switch(config)#no sntp daylight
X-ring Commands Set
Commands Level Description Example
ring enable G Enable X-ring switch(config)#ring enable
ring master G Enable ring master switch(config)#ring master
ring couplering G Enable couple ring switch(config)#ring couplering
ring dualhoming G Enable dual homing switch(config)#ring dualhoming
ring ringport G Configure 1st/2nd switch(config)#ring ringport 7 8