Transition Networks SISPM1040-182D - Manual (Page 63)

Transition Networks SISPM1040-182D-LR
Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
55
CCT - China Coast,
USSR Zone 7 
+8 hours  8 pm 
JST - Japan Standard,
USSR Zone 8 
+9 hours  9 pm 
EAST - East Australian
Standard GST
Guam Standard, USSR
Zone 9 
+10 hours  10 pm 
IDLE - International Date
Line
NZST - New Zealand
Standard
NZT - New Zealand 
+12 hours  Midnight 
„ SNTP Sever URL: Set the SNTP server IP address. You can assign a local network
time server IP address or an internet time server IP address.
„ Switch Timer: When the switch has successfully connected to the SNTP server
whose IP address was assigned in the column field of SNTP Server URL, the
current coordinated time is displayed here.
„ Daylight Saving Period: Set up the Daylight Saving beginning date/time and
Daylight Saving ending date/time. Please key in the value in the format of
‘YYYYMMDD’ and ‘HH:MM’ (leave a space between ‘YYYYMMDD’ and ‘HH:MM’).
¾ YYYYMMDD: an eight-digit year/month/day specification.
¾ HH:MM: a five-digit (including a colon mark) hour/minute specification.
For example, key in ‘20070701 02:00’ and ‘20071104 02:04’ in the two column
fields respectively to represent that DST begins at 2:00 a.m. on March 11, 2007
and ends at 2:00 a.m. on November 4, 2007.
„ Daylight Saving Offset (mins): For non-US and European countries, specify the
amount of time for day light savings. Please key in the valid figure in the range of
minute between 0 and 720, which means you can set the offset up to 12 hours.
„ Click Apply to have the configuration take effect.