Transition Networks SISPM1040-182D - Manual (Page 154)

Transition Networks SISPM1040-182D-LR
Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
146
[IP address] server IP 192.168.1.5
smtp authentication G Enable SMTP
authentication
switch(config)#smtp
authentication
smtp account
[account]
G Configure
authentication account
switch(config)#smtp account
John
smtp password
[password]
G Configure
authentication
password
switch(config)#smtp password
1234
smtp rcptemail
[Index] [Email address]
G Configure Rcpt e-mail
Address
switch(config)#smtp rcptemail 1
[email protected]
show smtp P Show the information
of SMTP
switch#show smtp
no smtp G Disable SMTP
function
switch(config)#no smtp
event device-cold-start
[Systemlog|SMTP|Both]
G Set cold start event
type
switch(config)#event device-cold-
start both
event authentication-
failure
[Systemlog|SMTP|Both]
G Set Authentication
failure event type
switch(config)#event
authentication-failure both
event ring-topology-
change
[Systemlog|SMTP|Both]
G Set X-ring topology
changed event type
switch(config)#event ring-
topology-change both
event systemlog
[Link-UP|Link-
Down|Both]
I Set port event for
system log
switch(config)#interface
fastethernet 3
switch(config-if)#event systemlog
both
event smtp
[Link-UP|Link-
Down|Both]
I Set port event for
SMTP
switch(config)#interface
fastethernet 3
switch(config-if)#event smtp both
show event P Show event selection switch#show event
no event device-cold-
start
G Disable cold start
event type
switch(config)#no event device-
cold-start