Transition Networks SISPM1040-182D - Manual (Page 147)

Transition Networks SISPM1040-182D-LR
Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
139
show mac-address-table
static
P Show static MAC
address table
switch#show mac-address-table
static
show mac-address-table
filter
P Show filter MAC
address table.
switch#show mac-address-table
filter
no mac-address-table
static hwaddr
[MAC]
I Remove an entry of
MAC address table of
interface (static)
switch(config)#interface
fastEthernet 2
switch(config-if)#no mac-address-
table static hwaddr
000012345678
no mac-address-table
filter hwaddr
[MAC]
G Remove an entry of
MAC address table
(filter)
switch(config)#no mac-address-
table filter hwaddr 000012348678
no mac-address-table G Remove dynamic
entry of MAC address
table
switch(config)#no mac-address-
table
SNMP Commands Set
Commands Level Description Example
snmp system-name
[System Name]
G Set SNMP agent
system name
switch(config)#snmp system-
name l2switch
snmp system-location
[System Location]
G Set SNMP agent
system location
switch(config)#snmp system-
location lab
snmp system-contact
[System Contact]
G Set SNMP agent
system contact
switch(config)#snmp system-
contact where
snmp agent-mode
[v1v2c|v3|v1v2cv3]
G Select the agent mode
of SNMP
switch(config)#snmp agent-mode
v1v2cv3
snmp community-
strings [Community]
right
[RO/RW]
G Add SNMP community
string.
switch(config)#snmp community-
strings public right rw
snmp-server host
[IP address]
G Configure SNMP
server host
switch(config)#snmp-server host
192.168.1.50 community public