Transition Networks SISPM1040-182D - Manual (Page 48)

Transition Networks SISPM1040-182D
Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
6.6.1 System configuration
„ DHCP Server: Enable or Disable the DHCP Server function. Enable—the switch
will be the DHCP server on your local network.
„ Low IP Address: Type in an IP address. Low IP address is the beginning of the
dynamic IP range. For example, dynamic IP is in the range between
192.168.1.100 ~ 192.168.1.200. In contrast, 192.168.1.100 is the Low IP address.
„ High IP Address: Type in an IP address. High IP address is the end of the
dynamic IP range. For example, dynamic IP is in the range between
192.168.1.100 ~ 192.168.1.200. In contrast, 192.168.1.200 is the High IP
address.
„ Subnet Mask: Type in the subnet mask of the IP configuration.
„ Gateway: Type in the IP address of the gateway in your network.
„ DNS: Type in the Domain Name Server IP Address in your network.
„ Lease Time (sec): It is the time period that system will reset the dynamic IP
assignment to ensure the dynamic IP will not remain occupied for a long time or
the server doesn’t know that the dynamic IP is idle.
„ And then, click Apply .
DHCP Server Configuration interface