Transition Networks SISPM1040-182D - Manual (Page 38)

Transition Networks SISPM1040-182D-LR
Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
30
5.3 Login in the Console Interface
When the connection between the Switch and the PC is ready, turn on the PC and run a
terminal emulation program or Hyper Terminal and configure its communication
parameters to match the following default characteristics of the console port:
Baud Rate: 9600 bps
Data Bits: 8
Parity: none
Stop Bit: 1
Flow control: None
The settings of communication parameters
After changing the parameter settings, click ‘OK’. When the blank screen shows up,
press the Enter key to have the login prompt appear. Type ‘root’ (default value) for both
User name and Password (use Enter key to tab), then press Enter and the Main Menu
of console management appears. Please see below figure for login screen.