Transition Networks SISPM1040-182D - Manual (Page 40)

Transition Networks SISPM1040-182D
Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
5.4 CLI Management
The switch supports console management—CLI commands. After you log in to the
system, you will see a command prompt. To enter CLI management interface, type
“enable”.
CLI command interface
The following table lists the CLI commands and their description.
5.5 Commands Level
Modes
Access
Method
Prompt
Exit
Method
About This Mode1
User EXEC
Begin a
session with
your switch.
switch>
Enter
logout or
quit.
The user commands
available at the user
level are a subset of
those available at the
privileged level.
Use this mode to
• Perform basic tests.
• Display system
information.
Privileged
EXEC
Enter the
enable
command
while in User
EXEC mode.
switch#
Enter
disable to
exit.
The privileged
command is the
advanced mode.
Use this mode to
• Display advanced
function status
• Save configuration